Tap Repairs in Wilston
Behind most dripping taps sits one worn sealing part, and a licensed plumber usually sorts tap repairs Wilston homes book in at the first visit. We fix dripping spouts, stiff mixers, leaking spindles and cracked tap bodies across Wilston and the suburbs around it, with the price in writing before anything is opened.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
This page covers what fails inside each kind of tap, where Queensland draws the line on do-it-yourself work, and when a repair stops making sense. For the broader fixture work, start with our tap and toilet plumbing page.
Washer Taps and Ceramic Disc Mixers Compared
A washer tap seals with a rubber washer pressed onto a valve seat; a mixer tap seals with a cartridge holding two ceramic discs. The two types fail differently, so the repair differs too.
Washer taps
have a hot and a cold handle, each turning several full turns. The washer rides on a jumper valve, the small part under the spindle that lowers the washer onto the seat to stop the flow.
Mixer taps
run hot and cold through a single lever, usually with a quarter-turn action. When the discs wear, the cartridge is replaced as a complete unit, matched to that model, since every make takes its own size and fitting.
A stiff or sticking handle usually points to a worn or gritty cartridge or spindle, even while the tap still holds water. That symptom belongs to the same visit, because the plumber has the tap open anyway.
Who May Repair a Tap in Queensland
Queensland keeps tap work almost entirely with the trade. The QBCC lists one tap job as unregulated: a washer or jumper valve swap, open to anyone with the understanding and skill, if the finished work meets the standards.
Every other repair sits with a licensed plumber. O-rings, cartridges, spindles and seat work are classed as minor work, which a licensee performs without a permit or any QBCC form to lodge.
Swapping the whole tap for a new one needs a licence as well. The QBCC guide uses exactly that job as its example of work a homeowner cannot do.
Renting adds a duty on the owner or manager. Queensland tenancy law requires the owner or manager to keep the place in good repair for the whole tenancy, and the tenant reports the fault as soon as it appears. A dripping tap sits outside the tenancy Act's emergency list, so it is routine, and the owner or manager arranges the fix within a reasonable time.
If the request goes nowhere, Form 11, a notice to remedy breach, gives the manager seven days minimum to act.
Still Dripping After You Turn It Off
Water still falling from the spout once the tap is closed means the sealing part has failed: the washer or its seat on an older tap, the cartridge on a mixer. Where the water shows narrows the fault further:
- Water around the handle while the tap is running points to the O-ring or the spindle seal.
- A wet base, or water under the bench, points to perished O-rings, a loose connection, or a body that corrosion has cracked.
Many fixtures have a small isolation valve on the supply line, and closing that valve shuts one tap while the rest of the house keeps running. Where no isolation valve exists, the stop tap at the meter closes clockwise, after checking that nothing, the hot water unit included, depends on that supply.
A cistern that keeps running is a separate fault, and our toilet repairs page covers it.
What Decides Repair or Replace
The price turns on the tap's style, the part required, the state of the seat and body, and how easily we can shut off the water. You see the exact figure in writing before any work starts.
Housing age shapes the call in this suburb. Area-level approvals data records 40 new dwellings across five years, and just one in 2021-22, so the taps on a Lamont Road bench or basin have usually been in service for decades. Long service pits seats and hardens O-rings, which is why a fresh washer alone sometimes will not hold.
Replacing becomes the better call when corrosion has cracked the body, when the seat is beyond resurfacing, or when a leak survives fresh washers and a new cartridge. Our tap replacement page walks through choosing and fitting a new tap.
How a Tap Repair Booking Runs
- 1
Describe the problem
Phone (07) 3523 7172 or fill in the form with what you're seeing in Wilston. The more we know, the better we can prepare.
- 2
We open the tap and find the fault
We shut the water at the isolation valve or the meter, strip the tap on the bench or wall, and identify whether the washer, O-ring, spindle or cartridge is at fault.
- 3
Agree on the price
A fixed quote comes before any work starts: flat-rate pricing, no hidden fees, and your go-ahead first.
- 4
Pay on completion
Card or EFTPOS on site when everything's working, or ask us about Fix now, pay later.
Plumbing job in Wilston?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Repair Questions Answered
Call (07) 3523 7172How do I stop my tap from dripping?
The sealing part has to be replaced: the washer on an older tap, or the whole cartridge on a mixer. Queensland leaves only a washer or jumper valve swap to a capable householder, and every other tap repair needs a licensed plumber, so call (07) 3523 7172.
Why does my mixer tap feel stiff to turn?
Wear or grit in the cartridge, or in the spindle, is the usual culprit. The cartridge is replaced as one complete unit, and the replacement has to match the model fitted, because sizes and fittings vary from make to make.
Is it worth repairing an old tap in Wilston?
Yes, while the body stays sound and the fault is a worn washer, O-ring or cartridge. Corrosion that has cracked the body, or a leak that survives new parts, means a replacement tap is the better call.
How much water does a dripping tap waste in Wilston?
A slow drip wastes thousands of litres over time, and the owner carries that loss on the water bill. The repair price turns on the tap and the part it needs, and a fixed quote settles the figure once we have seen the tap.
Will turning the tap off harder stop the drip?
No, and forcing the tap shut wears the washer and the valve seat faster. The worn part needs replacing instead, and that repair is work for a licensed plumber.
Book Your Tap Repair TodayWe'll call you back.
Book on (07) 3523 7172 for plumbing anywhere in Wilston. We're available 24/7, there's no extra charge for nights, weekends or public holidays, and every job comes with $0 call-out fees.
To claim your $0 call-out fee, call (07) 3523 7172 today.